We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Breather L-series 2" dia x 5" long 1/2" FNPT
Air Sentry® In-Line Filter/Dryers (L-Series) remove water vapor and solid contaminants from air exhaust lines, low pressure compressed air lines, vacuum lines, and other in-line airflow applications where clean, dry air is required. L-Series Breathers are available with 100% silica gel. Air enters the filter/dryer in one end and is cleaned and dried before leaving the other end.
L-Series - Air Sentry Desiccant Breathers
In-Line low airflow
Air Sentry® In-Line Filter/Dryers (L-Series) remove water vapor and solid contaminants from air exhaust lines, low pressure compressed air lines, vacuum lines, and other in-line airflow applications where clean, dry air is required. L-Series Breathers are available with 100% silica gel. Air enters the filter/dryer in one end and is cleaned and dried before leaving the other end. Solid particles are removed down to 2 microns. Water vapor is removed as the air passes through a bed of silica gel. The units are disposable and easy to install in the airline between a compressor and a hydraulic tank, or other similar applications.
Activated carbon versions are ideal for removing undesirable fumes and odors from air or other gases being vented to the atmosphere.
L-Series is rated up to 60 psi and mounted on the regulated side of the air line.
Summary
- Applications: Air Exhaust Lines • Vacuum Lines • Low Pressure Compressed Air Lines • Marine Vehicles
- Base Material: 100% Silica Gel
Features
- Minimize rust and corrosion
- Reduce component wear
- Reduce maintenance costs
- Prolong fluid life
- Reduce oil oxidation
- Enhance lubrication
- Eliminate fumes and odors
L-Series Specification Chart
Part # | Height inches (cm) | Diameter inches (cm) | Both Ends Connection | Silica Gel lbs (kg) | Maximum Adsorption Capacity fl. ounces (mL) |
Maximum Air Flow cfm | Maximum Reservoir Fluid Flow gpm | Type of Medium |
---|---|---|---|---|---|---|---|---|
L141 | 5.5 (14.0) | 2 (5.1) | ½" FNPT | 0.2 (0.1) | 1.35 (39) | 4 | 30 | 100% Silica Gel |
L142 | 8.5 (21.6) | 2 (5.1) | ½" FNPT | 0.3 (0.1) | 2.32 (68) | 6 | 45 | 100% Silica Gel |
L143 | 5.5 (14.0) | 3.25 (8.3) | ½" FNPT | 0.8 (0.4) | 4.91 (145) | 10 | 75 | 100% Silica Gel |
L144 | 8.5 (21.6) | 3.25 (8.3) | ½" FNPT | 1.2 (0.5) | 7.87 (232) | 10 | 75 | 100% Silica Gel |
L50* | 5.0 (12.7) | 3.25 (8.2) | ½" FNPT | 0,6 (0,27) | 3,68 (109) | 10 | 75 | 100% Silica Gel |
*Note - L50: Also used as replacement cartridge for the X-50
Type | L-Series | In-line Low Airflow |
---|---|
Mounting Connection | 1/2" FNPT |
Brand | Air Sentry |
Weight | 340.19 gram / 0.8 lbs |